Availability for Legacy 300 WATT MODELS (Standard, no suffix, M and MZ) is limited to factory stock. See corresponding HSF-A and HSF-AM models for replacement.
Reason For Query box below.
Bus Bar, Series P/N 172-0593, Bus Bar, Series - Connects output terminals of adjacent slots (+) to (-) for series configurations. Bus Bar, Parallel, 2 Slots 2.6mm clearance) ( P/N 172-0590 - Connect output terminals of slots 1 and 2, 2 and 3, or 3 and 4 in parallel; two bus bars required for each paralleled slot: one for (+), one for (-). Bus bar is 3/32in. thick, clearance between (+) and (-) is 2.6mm with two output studs. Each stud is 5/16-18, 1.2-inch long minimum. Bus Bar, Parallel, 2 Slots (6.4mm cleararnce) P/N 172-0607 - Same as P/N 172-0590 except bus bar is 1/8 in. thick and clearance between (+) and (-) is 6.4mm; only one (1) output stud (5/16-18) per bus bar. Each stud is 5/16-18, 1.2-inch long minimum. Two required: one for (+) and one for (-). Bus Bar, Parallel, 2 Slots (6.4mm clearance) P/N 172-0615 - Same as P/N 172-0590 except bus bar is 1/8 in. thick and clearance between (+) and (-) is 6.4mm with two (2) output studs per busbar. Each stud is 5/16-18, 1.2-inch long minimum. Two required: one for (+) and one for (-)Bus Bar, Parallel, 3 Slots, (4.5mm clearance) P/N 172-0591 - Connect output terminals of slots 1, 2 and 3, or 2, 3 and 4 in parallel; two bus bars required for each paralleled set of slots: one for (+), one for (-). Bus bar is 1/8 in.thick, clearance between (+) and (-) is 4.5mm with two (2) output studs per busbar. Each stud is 5/16-18, 1.2-inch long minimum.Bus Bar, Parallel, 3 Slots (6.4mm clearance) P/N 172-0608 - Same as P/N 172-0591 except clearance between (+) and (-) is 6.4mm. Two required: one for (+) and one for (-)Bus Bar, Parallel, 4 Slots (4.5mm clearance) P/N 172-0592 - Connect output terminals of slots 1 through 4 in parallel; two bus bars required for each rack adapter: one for (+), one for (-). Bus bar is 1/8 in. thick, clearance between (+) and (-) is 4.5mm with three (3) output studs per bus bar.Each stud is 5/16-18, 1.2-inch long minimum. Bus Bar Parallel, 4 Slots, (6.4mm clearance) P/N 172-0609 - Same as P/N 172-0592 except clearance between (+) and (-) is 6.4mm. Two required: one for (+) and one for (-)Bus Bar, Parallel, 4 Slots (6.4mm clearance) P/N 172-0688 - Connect output terminals of slots 1 through 4 in parallel; 1 pair, (+) and (-), bus bars required for each rack adapter: Bus bar is 1/8 in. thick, clearance between (+) and (-) is 6.4mm. Instead of output studs, each bus bar has 15 6-32 tapped holes for output connections.
Project Name:
Quantity:
For quantity discounts please use Reason for Query box to indicate models, quantities and delivery requirements (if known).
Reason for Query:
(Please include your application and any special needs)
Contact Information:
NOTE: Required information is indicated in BOLD
