| KLP 1200W MODEL TABLE | ||||||||
| MODEL (3) |
RATED VOLTAGE RANGE (1) |
MAXIMUM CURRENT FOR RATED VOLTAGE |
MINIMUM PROGRAMMABLE CURRENT |
RATED CURRENT RANGE (1) |
MAXIMUM VOLTAGE FOR RATED CURRENT |
RIPPLE AND NOISE p-p (2) |
EFFICIENCY @115V a-c |
|
| KLP 10-150 | 0-10V | 120A@10V | 1.9A | 0-150A | 8V@150A | 60 mV | 80% | |
| KLP 20-120 | 0-20V | 60A@20V | 1.5A | 0-120A | 10V@120A | 60 mV | 82% | |
| KLP 36-60 | 0-36V | 33.3A@36V | 0.8A | 0-60A | 20V@60A | 60 mV | 83% | |
| KLP 75-33 | 0-75V | 16A@75V | 0.4A | 0-33.3A | 36V@33.3A | 60 mV | 84% | |
| KLP 150-16 | 0-150V | 8A@150V | 0.2A | 0-16A | 75V@16A | 125 mV | 86% | |
| KLP 300-8 | 0-300V | 4A@300V | 0.1A | 0-8A | 150V@8A | 150 mV | 87% | |
| KLP 600-4 | 0-600V | 2A@600V | 0.05A | 0-4A | 300V@4A | 150 mV | 88% | |
| (1) | The maximum current and voltage are constrained by the 1200 watt power limitation, see Operating Region Figure. |
| (2) | Bandwidth: 20MHz; low frequency ripple may be higher at loads less than 30 Watts. |
| (3) |
Standard models (no suffix) include built-in GPIB and RS 232 Interfaces. E-Series models (suffix E) include built-in GPIB and LAN Interfaces. |
| NOTE: | The unit is shipped with a user-wirable mating connector for the IEC 320 style recessed power inlet connector. Optional line cords are available as accessories. |
