BOP-E Series Ethernet Control DC Bipolar Power Supplies

• True 4-quadrant programmable voltage and current power supplies.
• 14 Standard Models, ± 0-5 Volts to ± 0-200 Volts, ± 0-5 Amps to ± 0-30 Amps.
• Dual-range, 16-bit interface provides 15 bits of resolution for both full and quarter scale of output.
• Inductive load and capacitive load optimized versions.
• Discovery: MDNS (Bonjour - like the printer discovery) and VXI-11 (National Instruments Ni Max, Agilent Io controller)
• IP address support: DCHP, AUTOIP and Static IP (using Web Page)
• Connections: SOCKET @ port 5025 and TELNET @ port 5024
• Connection throughput: 25 milliseconds
• EPICS Driver (Linux compatible) now available!

The BOP-E Series are the latest additions to Kepco's family of ethernet-controlled power supplies and electronic loads.

When connecting BOP with BIT 802E cards installed in parallel or series, the slave BIT card must be disabled; refer to refer to BOP Application Note: How to Disable BIT card in BOP models with BIT 802E or 4886 cards installed or in BOP 2X-DE Models for instructions as well as how to maintain digital control over a parallel/series combination.